Sony UWP-C1/C2 Microphone User Manual


 
Attachment and Installation Procedures
26
• The buttons and display on the front
panel of the diversity tuner module
(URX-M1) may be damaged if they
are gripped too strongly. Always
hold the diversity tuner module by
the side.
Do not put your fingers on the
connectors on the rear panel of the
diversity tuner module (URX-M1) or
into the slot on the unit into which
the diversity tuner module (URX-
M1) will be installed.
Keep the diversity tuner module
(URX-M1) away from static
electricity.
Installing a diversity tuner
module (URX-M1) into an MB-
806A Tuner Base Unit
The MB-806A Tuner Base Unit can
accommodate up to 6 diversity tuner
modules (URX-M1).
1 Holding both sides of the diversity
tuner module (URX-M1), insert it
into the slot.
Push it in until you hear a click.
2 To install two or more diversity
tuner modules (URX-M1) , detach
the necessary number of blank
panels by pressing the top and
bottom tabs on each panel towards
each other and pulling the panel
out. Then do step 1 for each
module.
Removing a diversity tuner
module (URX-M1)
On the bottom panel of the MB-806A,
locate the lever corresponding to the
slot of the diversity tuner module
(URX-M1) to be removed and pull the
lever forward. The diversity tuner
module (URX-M1) is ejected from the
slot.
Lever