Filter
Top Products
33
5 + (+ selection) / – (– selection/
reset) buttons
Press these buttons to set the
transmission channel, frequency, or
attenuation level of the input signal.
The “–-” button resets the
accumulated battery use time to
“00:00”.
6 SET button
Press to change display parameters.
For details, see “Settings” on page
47.
7 POWER switch
Turns the power of the transmitter ON
or OFF.
8 Battery compartment
Accommodates two LR6 (size AA)
alkaline batteries.
For details on how to insert the
batteries, see “Power Supply” on
page 38.
Portable diversity tuner
(URX-P1)
1 Antennas a/b
The angle of the antennas can be
adjusted manually.
2 MONITOR connector (3.5-mm
diameter stereo mini jack)
To monitor the tuner output, connect
the headphones to this connector.
3 RF (radio frequency) indicator
The color indicates the strength of the
RF input signal.
On in green: RF input is 15 dBµ*
or more.
Off: RF input is less than 15 dBµ*.
......................................................................................................................................................................
* 0 dBµ = 1 µVEMF
Transmission
channel
Transmission
frequency
Attenuation
level of the
input signal
Accumulated
battery use
time
Press
the
SET
button.
The channel/frequency
indications for U66 model are
shown.