Filter
Top Products
49
Pressing the – button cycles the
indications in the opposite
direction.
Hold down the + or – button to
change the channel group faster.
4 When the desired channel group
number appears, press the SET
button.
The selected group is entered.
The right four digits start to flash
to allow the selection of the
channel number.
5 Press the + or – button to select
the channel number.
The channel indication changes in
the order shown in the tables in
the pdf files “Sony Wireless
Microphone System Frequency
List” on the supplied CD-ROM
(for U62, U66, CE62, and CE67
models) or the supplied leaflet
“Sony Wireless Microphone
System Frequency List” (for
AU66 and CE67 models).
6 When the desired channel number
appears, leave the tuner for about
10 seconds until the selected
channel number stops flashing and
the selection is stored in memory.
To select the channel by
frequency indication
1 Press the SET button for more
than one second.
Keep pressing the SET button
until the display seciton
parameters start to flash.
2 Press the SET button repeatedly
until the frequency indication
appears and starts flashing.
3 Press the + or – button to select
the frequency.
4 When the desired frequency
appears, leave the tuner for about
10 seconds until the selected
channel frequency stops flashing
and the selection is stored in
memory.
Notes
• When you are setting the reception
channel, the tuner can be used to
receive signals.
• Do not remove the batteries while
setting the reception channel. If they
are inadvertently removed, re-insert
them immediately and redo the
procedure “Setting the reception
channel” from step 1.
Example: When the channel group
00 is selected