Sony UWP-C1, UWP-C2, UWP-C3 Microphone User Manual


 
Power Supply
40
Note
The indicated battery condition may not be correct if the batteries were not new
when installed. If you plan to use the component for a long period, it is
recommended that you replace the batteries with brand new ones.
Notes on batteries
Batteries may leak or explode if mistreated. Be sure to follow these instructions.
Be sure to install the batteries with the correct polarity.
Always replace the two batteries together.
Do not use different types of batteries or old and new one together.
The batteries are not rechargeable.
When not using the component for a long period of time, remove the batteries to
avoid leakage. If the batteries do leak, clean all leakage from the battery
compartment and the component. Leakage left in the compartment and the
component may cause poor battery contact. If there seems to be poor battery
contact, consult your Sony dealer.
Battery indication
When you turn the power on, the battery condition is shown by the BATT
indication in the display section.
When the indication in column 4 starts to flash, replace the batteries with new
ones. Be sure to check the expiration date printed on the new batteries before
using them.
12 34
BATT indication Lights Lights Lights Flashes
Battery status Good Less than Less than Almost
50% charged 20% charged drained