Filter
Top Products
10
Heading
Before using your MultiProcessor™ Compact
• Wash the processing bowl, cover and all
attachments in warm water using a mild
detergent. Dry each part thoroughly before
use.
• Before you assemble the food processor,
ensure that the power cord is unplugged.
• Place the motor base facing you on a dry,
level surface.
• Position the processing bowl on the motor
base, with the processing cover off, over
the drive shaft. The handle of the bowl
needs to be facing you. Turn the processing
bowl counter-clockwise to lock into
position.
• Insert the spindle into the food processor
bowl by placing the shaft in the centre of
the bowl. Rotate until the spindle falls
into place.
• Place the processing bowl cover onto the
processing bowl, by aligning the icon
marked on the handle, with the icon
(include arrow down) on the bowl cover.
Rotate the lid to lock.
Important:
If the processing bowl and
cover are not correctly assembled, the
MultiProcessor™ Compact will not operate.
Using your MultiProcessor™ Compact
• Plug the power cord into a 230-240V AC
power outlet and turn power ‘ON’.
• Using the control dial, select the desired
processing speed.
The pulse function remains as long as the
Pulse button is pressed down.
The two speeds on the speed dial, will
provide continuous processing until the
control dial is returned to the ‘OFF” position.
Further ingredients can also be added whilst
processing by pouring through the feed tube
once the food pusher has been removed.
After you have completed processing, turn
the control dial to the ‘OFF’ position.
Note: For maximum control when using your
food processor, load the feed tube before
turning on your food processor. Always use
the food pusher for more evenly processed
foods and never use your fingers.
Important: When mixing a heavy load i.e
1.5kg dough, do not operate the food
processor for more than 38 secs at a time.
Using your Food Processor