Filter
Top Products
IMPORTANT SAFETY PRECAUTIONS
16 TASCAM CD-RW900SL16 TASCAM CD-RW900SL
The CD-RW900SL can be used to play back CDs (includ-
ing CD-R and CD-RW discs that have been recorded and
finalized on other types of recorder), as well as CD-R discs
and CD-RW discs that have been recorded on the unit.
Audio files in MP3 format on CD-ROM, CD-R and
CD-RW are also playable on the unit.
Track selection
Skipping track numbers backward or forward.
1. Select desired tracks for playback with the MULTI
JOG dial on the front panel. Turning clockwise
skips the track number backward and counter-
clockwise skips forward.
Or, press the SKIP key on the remote control.
Pressing
Â
key skips the track number back-
ward and
¯
key skips forward.
2. Press the PLAY key to start playback.
Or, press the READY key to cue the track and enter
playback standby mode after moving to the head
of the selected track. To start playback, press the
PLAY key.
Using the skip function
Simple playback operations
WARNING
If you are monitoring using headphones, first adjust
the level control to low on the unit, then connect
to the PHONES jack before playing back. This will
prevent any possible damage to your hearing.
NOTE
The explanation in this manual will assume the user is
starting from the normal Continuous mode.
1. Press the POWER switch to turn on the unit.
2. Insert a disc into the unit with the label side up.
The display shows Disc Loading. Then TOC
Reading will appear with the period flashing.
When the TOC has been read, the display shows the
number of tracks and total running time of the disc.
Disc type
Total running timeTotal number of tracks
The CD-RW900SL also shows one of the following:
TOC A disc finalized
MP3 A disc contains MP3 files
3. Press the PLAY key to start playback.
Adjust the connected monitor system, or the level
control for the PHONES on the unit to set the listen-
ing level you desire.
NOTE
If a disc has scratch or grime, it could cause the laser
pickup to “skip.” In this case, set the READ SPEED
sub-menu in the PLAY menu option to “High“ (see
“Operation basics” on page 15). This may resolve the
problem, however, the unit’s running sound may
become louder.
4. To stop playback, press the STOP key.
To temporarily stop playback and enter playback
standby mode, press the READY key. To resume
playback, press the PLAY key again.
NOTE
To confirm the total playing time, use the PLAY TIME
option in the SYSTEM sub-menu (see “Operation
basics” on page 15)
Discs for playback
The CD discs in the CD-RW900SL can play back the types
of discs listed below.
Commercial pre-recorded CDs recorded in CD-DA
format.
CD-R and CD-RW discs that have been recorded in
CD-DA format and finalized properly.
•
•
MP3 files recorded in ISO9660 level 1 and level 2
format on CD-R and CD-RW discs, and properly final-
ized. MP3 files that are recorded to a disc with Joliet
format extensions are also playable.
•
4 − Playback operations