Tascam CD-RW900SL Recording Equipment User Manual


 
IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-RW900SL 17
4 − Playback operations
TASCAM CD-RW900SL 17
Track search
Press the ∆/˚ search key continuously on the front
panel, or the SEARCH ∆/˚ key on the remote control.
To stop the search function, simply release the ∆/˚ or
the SEARCH key.
NOTE
The search function does not operate with MP3 discs.
Normal search
Using the number keys on the remote control, the number
of the desired track can be entered directory. Even numbers
with two or three digits can be entered easily. For example:
Track 9: press ‘9’ and 009 will be displayed.
Track 12: press ‘1’ and ‘2’ and 012 will be displayed.
Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.
After input, press the PLAY key to start playback. Or, the
READY key to cue the track at its head position and enter
playback standby mode.
You can also enter the track number and start playback by
pushing the MULTI JOG dial or using the ENTER key.
NOTE
This function cannot be used in Program or Random mode.
Selecting by track number
Direct search
By specifying time from the start of a certain track, you can
start playback from a specified point of a specified track.
Basic operation
During stop, play or playback standby modes, use the
number keys on the remote control to input the three-digit
track number (such as 002 for track 2), then the desired
elapsed time (***min **sec) from the start of that track.
Example: To specify 1 min 30 sec from the start of track 2,
input “002 001 30”.
During input, the counter in the display will flash.
NOTE
Regardless of the time display mode (see “Time
display switching on page 19), the time from the start
of the specified track is displayed.
Pressing the CLEAR key cancels the input at any stage
during input.
During stop or playback modes, when the final digit is
entered, the desired position is automatically located and
playback will begin from the desired point. During play-
back standby mode, at the desired point the unit will enter
playback standby mode.
NOTE
If a point which does not exist is entered, Direct
Search time entry mode will be cancelled.
The direct search function cannot be used in program
or random mode.
ª
For MP3 discs, time cannot be specified within a track.
However, if you input the three-digit track number,
playback will begin from the start of that track.
Operation variations
Even if the final “seconds” time value is not input, play-
back will begin from the selected “minutes” time after
pressing the ENTER or PLAY key. Or, if you press the
READY key, the unit will enter the playback standby mode
at the selected point.
Specifying a track number only
After inputting the track number, press the ENTER or
PLAY key to begin playback of that track, or the READY
key to cue the track and enter playback standby mode.
NOTE
Instead of inputting the three-digit track number, you
can input only the desired track number.
Example: To specify track 3, input only “3”.
Specifying to the minute
After inputting the three-digit track number and the number
of minutes after the start of the track, press the ENTER or
PLAY key to begin playback of that track, or the READY key
to cue the track and enter playback standby mode.
Example: To specify 1 min 00 sec from the start of track 2,
input “002 001”
NOTE
Following the above example, if “0021” is input, the
same position will be located.
ª
ª