Filter
Top Products
12 TASCAM RC-F82
4 – Mixer Control Functions
This unit has rotary controls and faders for 8 channels.
The knobs can be used to adjust one of three parameters:
the microphone input level (TRIM), the stereo position
sent to the stereo bus (PAN) or the level sent to the stereo
bus (LEVEL). The faders can be used to adjust one of two
parameters: microphone input (TRIM) or the level sent to
the stereo bus (LEVEL).
To set this, use the
Volume
Fader
Mode
item on the
RC-F82
page of the HS-P82. You cannot, however, set
the knobs and faders to have the same functions. To open
the
RC-F82
page on the HS-P82 unit, press this unit’s
REMOTE SETUP [F4] key or follow the procedures below.
1 Press the MENU key on the HS-P82 unit to open the
MENU screen.
2 Press the
REMOTE
SETUP
button to open the
REMOTE
SETUP
screen.
3 Touch the
RC-F82
tab to open its page.
Kob setting
Fader setting
4 Select a button shown next to the
Volume
Fader
Mode
item. The top line of each button shows the
knob setting, and the bottom line shows the fader
setting.
Button label Function
TRIM Microphone input level
PAN Stereo position sent to the stereo bus
LEVEL Level sent to stereo bus
Knob functions
Knobs can be set to one of three functions. The current
setting can be confirmed by viewing the VOLUME MODE
indicators.
TRIM (microphone input)
Choose this setting to adjust the microphone input level.
When you change the setting, the track name display area
below the meters shows the gain value for a while.
This has the same function as the input trim knobs on the
front panel of the HS-P82 unit.
PAN (stereo positions sent to the stereo bus)
Choose this setting to set the left-right stereo position
sent to the stereo bus. Turn it all the way to the left to
send the signal completely to the left channel. Turn it all
the way to the right to send the signal completely to the
right channel. Send it to the center to send the signal
equally to both left and right channels.
This has the same function as the
PAN
knob on the
PAN/
LVL
page that opens when you touch the
PAN/LVL
button on the Home Screen and on the
CHx
SETUP
screens (channel setting screens where “
x
” is the channel
number) of the HS-P82 unit.
PAN/LVL page of the Home Screen
Channel setting screen
LEVEL (level sent to the stereo bus)
Choose this setting to adjust the level sent to the stereo
bus.
This has the same function as the
2Mix
LVL
knob on
the
PAN/LVL
page that opens when you touch the
PAN/LVL
button on the Home Screen and on the
CHx
SETUP
screens (channel setting screens where “
x
” is the
channel number) of the HS-P82 unit. Adjust it in a range
from -∞ when turned all the way to the left and +10 dB
when turned all the way to the right.
CAUTION
The same adjustments can be made using both this unit
and the HS-P82. The adjustments made most recently
will be used, regardless of which unit they were made
with. For this reason, if you make an adjustment using