Filter
Top Products
8 TASCAM RC-F82
o SEL [REC] key (STEREO MIX)
Press this key to open the stereo channel setup screen
(
L/R
SETUP
page) on the HS-P82’s color display.
While pressing and holding the SHIFT key, press this
key to enable/disable stereo mix (
LR
2MIX
) recording.
p STEREO MIX knobs (L-R, SOLO)
Use these knobs to adjust the master level of the
stereo mix.
L-R knob
This adjusts the master level of both left and right
channels at the same time.
SOLO knob
This adjusts the solo level.
CAUTION
The same adjustments can be made using both this unit
and the HS-P82. The adjustments made most recently
will be used, regardless of which unit they were made
with. For this reason, if you make an adjustment using
the HS-P82 unit, the setting will differ from that last made
using controls on this unit.
a Ô/Â [MARK Â] key
When stopped/in playback standby/during playback:
Press briefly to skip to the beginning of the
•
current take (file) or the previous file, and stop/
continue playback standby/resume playback at the
beginning of that take (file).
Press to search backwards while pressing.
•
Press this key while pressing the
•
SHIFT key to move
to the previous mark, and stop/continue playback
standby/resume playback.
This functions in the same way as the Ô [Â] key on
the HS-P82 unit.
s SHIFT key
This key works just like a shift key on a computer.
It works with other keys on this unit that have blue
labels. There are two SHIFT keys—one at the top left
and one at the bottom right—but they have the same
function.
d /¯ [MARK] ¯ key
When stopped/in playback standby/during playback:
Skip to the beginning of the next take (file), and
•
stop/continue playback standby/resume playback
at the beginning of that take (file).
Press to search forward while pressing.
•
While pressing the
•
SHIFT key, press this key to
move to the next mark, and stop/continue playback
standby/resume playback.
This functions in the same way as the [¯] key on
the HS-P82 unit.
f MARK key
Press this key to add a mark at the current time. The
maximum number of marks, including automatic
marks, possible in a single file (take) is 99.
This functions in the same way as the MARK key on
the HS-P82 unit.
g STOP [RETAKE] key
Press to stop recording or playback.
Press this while pressing and holding the SHIFT key to
erase the last recorded take and retake the recording.
While recording, press this key to stop recording and
stop the unit at the beginning of the last recorded file.
This functions in the same way as the STOP [RETAKE]
key on the HS-P82 unit.
h PAUSE key/indicator
Press this key during playback to put the unit in
playback standby. This key lights when in standby.
Press this key while recording to put the unit in
recording standby. This key lights when in standby.
Press this key when the unit is stopped to put the unit
in recording standby. This key lights when in standby.
This functions in the same way as the PAUSE key on
the HS-P82 unit.
j REC key/indicator
When a recordable CF card is installed and the unit is
stopped, press this key to start recording to a new file.
This key lights when recording.
When in recording standby, press this key to resume
recording to a new file or the current file. This key
lights when recording.
If you press this key while recording, recording to the
current file stops, but recording continues to a new
file.
This functions in the same way as the REC key on the
HS-P82 unit.
k PLAY [CALL] key
When stopped or in playback standby, press this key
to start playback.
While pressing the SHIFT key, press this to use the
CALL function (locate to the point where playback was
last started from standby).
Press this key when in recording standby to start
recording.
This functions in the same way as the PLAY [CALL] key
on the HS-P82 unit except it lacks a LED indicator.
2 – Names and Functions of Parts