Filter
Top Products
Using, Creating and Editing Songs
Recording Your Performance
CVP-305/303/301 Owner’s Manual
150
Examples of re-recording with various Punch In/Out settings
This instrument features several different ways you use the Punch In/Out function.
The illustrations below indicate a variety of situations in which selected measures
in an eight-measure phrase are re-recorded.
■ Pedal Punch In/Out settings
When this is set to ON, you can use the sostenuto pedal to control the punch-in
and punch-out points. While a Song is playing back, pressing (and holding) the
sostenuto pedal instantly enables Punch In recording, while releasing the pedal
stops recording (Punch Out).You can press and release the sostenuto pedal as often
as you want during playback, to punch in/out of overwrite recording. Note that the
current function assignment of the sostenuto pedal is cancelled when the Pedal
Punch In/Out function is set to ON.
Editing Channel Events (CHANNEL)
The explanations here apply to the CHANNEL tab display in the step 4 of the Basic
Editing Operation on page 148.
1 Use the [A]/[B] buttons to select the Edit menu (page 151).
2 Use the [1
ππ
ππ
††
††
]–[8
ππ
ππ
††
††
] buttons to edit the data.
For information on the available parameters, see page 151.
3 Press the [D] (EXECUTE) button to execute the operation for the cur-
rent display.
After the operation (with the exception of the SETUP menu display) is com-
pleted, this button changes to “UNDO,” letting you restore the original data
if you are not satisfied with the Operation results. The Undo function only
has one level; only the immediate operation can be undone.
12345678
12345
NORMAL
REPLACE ALL
PUNCH IN setting
PUNCH OUT setting
Original data
Start overwrite recording Stop recording
*1 *2
Stop recording
Stop overwrite recording/Play original data
Stop overwrite recording/Play original data
Stop overwrite recording/Play original data
Previously recorded data
Newly recorded data
Deleted data
*2
Stop recording
*2
Stop recording
*2
Stop recording
*2
Stop recording
*2
Start overwrite recording
*1
Start overwrite recording
Play back (Original data) Play the keyboard to
start overwrite recording
Play the keyboard to
start overwrite recording
Play the keyboard to
start overwrite recording
Play back (Original data)
Play back (Original data)
Play back (Original data)
Play back (Original data)
Play back (Original data)
*1 To avoid overwriting measures 1-2, start recording from measure 3
*2 To stop recording, press the [REC] button at the end of measure 5.
*1
12345678
NORMAL
PUNCH OUT
12345678
NORMAL
PUNCH OUT AT=006
12345
FIRST KEY ON
REPLACE ALL
12345678
FIRST KEY ON
PUNCH OUT
12345678
FIRST KEY ON
PUNCH OUT AT=006
12345
PUNCH IN AT=003
REPLACE ALL
12345678
8
PUNCH IN AT=003
PUNCH OUT
1234567
PUNCH IN AT=003
PUNCH OUT AT=006