Filter
Top Products
Specifications 17
AD824—Owner’s Manual
Analog Input
Analog Output
Power requirements
U.S.A. & Canada 120 V AC, 60 Hz
Europe 230 V AC, 50 Hz
Power consumption 50 W
Dimensions (W
×
H
×
D) 480 × 97.5 × 377.6 mm (18.9 x 3.84 x 14.86 inches)
Weight 8.5 kg (18.7 lbs)
Free-air operating temperature 10˚ C to 35˚ C (50˚ F to 95˚ F)
Storage temperature –20˚ C to 60˚ C (–4˚ F to 140˚ F)
Relative humidity 10%–95%
Power cord length 1.9 m
Supplied accessories Owner’s Manual, 9-pin D-sub crossed cable (1.5m)
Options MY8-AT, MY8-TD, MY8-AE mini YGDAI I/O cards
1. Measured with a 6 dB/octave filter at 12.7 kHz; equivalent to a 20 kHz filter with infinite
dB/octave attenuation.
2. Measured with a 6 dB/octave filter @ 80 kHz.
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
Connectio
n
GAIN
Actual
Load
Impedance
For Use
with
Nominal
Input Level
Connector
Nominal
Max.
before clip
INPUT 1–8
1
1. 24-bit linear, 128-times oversampling A/D converters.
–62 dB
3k Ω lines
50–600 Ω
mics &
600 Ω lines
–62 dB
(615 µV)
–48 dB
(3.08 mV)
XLR-3-31 type
(balanced)
2
2. XLR-type connectors are electronically balanced (pin 1 = ground, pin 2 = hot, pin 3 = cold).
+10 dB
+10 dB
(2.45 V)
+24 dB
(12.28 V)
INSERT IN 1–8 10k Ω 600 Ω lines
+10 dB
(2.45 V)
+24 dB
(12.28 V)
TRS phone jack
(balanced)
3
3. TRS phone jacks are electronically balanced (tip = hot, ring = cold, sleeve = ground).
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.
Connection
Actual
Source
Impedance
For Use
with
Nominal
Output Level
Connector
Nominal
Max.
before clip
INSERT OUT 1–8 150 Ω 10k Ω lines
+10 dB
(2.45 V)
+24 dB
(12.28 V)
TRS phone jack
(balanced)
1
1. TRS phone jacks are electronically balanced (tip = hot, ring = cold, sleeve = ground).
* Where dB represents a specific voltage, 0 dB is referenced to 0.775 V rms.