Yamaha AW 1600 Musical Instrument User Manual


 
AW1600 Owner’s Manual
List of editing commands
12
Track editing
134
Exchanges data between the specified tracks.
For an audio track
Adjusts the length of the specified region of an audio
track, without changing the pitch.
If you set Ratio = 50%
If you set Ratio = 200%
Parameter Range Explanation
1 From TR
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
ST The stereo track
2 From V.TR
1–8 Exchange-source virtual track
number
3 Name
Up to eight
alphanumeric
characters
Exchange-source virtual track
name (display only)
4 To TR
*1
*1. The items that you can select in 4 To TR (copy-destination track)
will depend on the
1 From TR (copy-source track) setting.
If
1 From TR is a single audio track 1–16, you can select only a sin-
gle audio track 1–16.
If
1 From TR is ST or 1/2–15/16 (a pair of adjacent audio tracks),
you can select only 1/2–15/16 (a pair of adjacent audio tracks).
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
5 To V.TR
1–8 Exchange-destination virtual
track number
6 Name
Up to eight
alphanumeric
characters
Exchange-destination virtual
track name (display only)
EXCHANGE
4 65
1 2 3
EXCHANGE
From
Track
To
Track
From
Track
To
Track
1 2 3 4 5 6
A B C D E F
1 2 3 4 5 6
A B C D E F
Parameter list
The track names will not be exchanged.
NOTE
Parameter Range Explanation
1 From TR
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
ST The stereo track
2 From V.TR 1–8 Virtual track number
3 From Start Specify a point Beginning of the edited region
4 From End Specify a point End of the edited region
5 To End
Specify a point Specify the length to which the
selected region will be com-
pressed or expanded
6 To Ratio
50–200% Specify the percentage by which
the selected region will be com-
pressed or expanded
TIME COMP/EXP
(Time Compression/Expansion)
5 6
1 2 3 4
TIME
COMP/EXP
From End
1 2 3 4 A B C D
12 3 4
A B C D
From Start
To END
TIME
COMP/EXP
From End
1 2 3 4 A B C D
1
C D
From Start
To END
2 3 4
Parameter list
•To End and To Ratio are linked, so that editing one field will cause
the other field to change.
•You cannot set To End or To Ratio to a value that would cause the
ratio to exceed 50–200 percent.
•From Start value and From End value must be at least 45 msec
apart. These cannot be set to a shorter interval.
NOTE