Filter
Top Products
96 CLP-990
Message List
Message Meaning
This message prompts you to confirm the execution. Press the B [+ (YES)]
button to continue. Press the B [– (NO)] button to cancel.
There is a malfunction with the TO HOST connector.
When you are using the CLP-990 with a connected computer:
The power to the computer is turned off, the cables are connected incor-
rectly, the [HOST SELECT] switch is set incorrectly, or the driver or MIDI
application on the computer works incorrectly. Turn off the power to the
CLP-990 and the computer, then check the cable connections and the
[HOST SELECT] switch setting. Then, turn on the power to the computer
and the CLP-990 in this order and check to see if the driver and MIDI appli-
cation on the computer work properly.
When you are using only the CLP-990:
This message appears if a cable is connected to the TO HOST connector on
the CLP-990. In this case, turn off the power to the CLP-990, remove the
cable from the TO HOST connector, then turn on the power to the CLP-990.
If the cable is left connected to the TO HOST connector, the CLP-990 may
not work correctly.
You tried to perform a file- or disk-related operation using an unformatted
disk. Eject the disk, format it using the “FormatDisk” parameter (page 56),
and try again.
You tried to perform a file- or disk-related operation using an unformatted
disk. To cancel the operation, press the B [– (NO)] button. To format the
disk and try again, press the B [+ (YES)] button to display the “FormatDisk”
parameter (page 56).
You tried to copy data to a different type of disk (e.x.: 2DD
→2HD,
2HD
→2DD) during the CopyDisk operation (page 55). Eject the disk and
insert an appropriate disk.
You used a period or space at the beginning of a song name or you tried to
change a song name that includes a character (or characters) not supported
by the CLP-990, and the CLP-990 could not process the name. The Clavi-
nova displays the previous screen in three seconds. Rename the song cor-
rectly.