Filter
Top Products
106
MIDI
9
Receive Channels
When using another MIDI device to play the Electone’s voices, you must
set the MIDI transmit channel(s) of the connected device to match the
receive channel(s) of the Electone.
The MIDI receive channels of the Electone are fixed to the following
values:
Upper Keyboard: 1
Lower Keyboard: 2
Pdalboard: 3
MIDI IN Page
DATA CONTROL
<MIDI IN> LEAD:INT.‹
SYNC:INT. EXP.:AUTO
1-1
1-2
DATA CONTROL PAGE
1 Internal/External Controls
Switches between the Electone (INT.: Internal) and the connected device
(EXT.: External) to control the displayed items.
1
-1
Lead
Determines Internal or External control of the Lead Voices. When
set to Internal, Lead Voices are played from the Electone and the
sounds from a connected MIDI instrument can be played via MIDI
channel 1 (or channel 2, when the To Lower function is on). When
set to External, the Lead Voices can only be played from the
connected instrument via MIDI channel 4.
1
-2
Sync.
Determines the source of the timing control, for rhythm
synchronization purposes. Setting this to Internal gives the Electone
timing control over the connected rhythm machine. This also allows
you to start and stop the rhythms of the connected rhythm machine
from the Electone’s panel controls. Setting this to External gives
timing control to the connected rhythm machine.
NOTE:
Accompaniment pattern sounds cannot be
controlled via MIDI.
NOTE:
For the information on EXP. See page 103.