Filter
Top Products
94
Music Disk Recorde
r
6
PAUSE
RECORD PLAY
SHIFT
(
LEAD
)
REM.MEM.
(
K.PERC.
) (
LEAD
) (
K.PERC.
)
9) Checking the Remaining Memory
You can check the amount of memory available for additional recording
in a disk by pressing PAUSE button while holding down SHIFT button.
The amount of available memory will be displayed on the LED.
The maximum amount of memory is ca.700 for 2DD disks and ca.1400
for 2HD disks.
10) Voice Disks and Pattern Disks
The M.D.R. also allows you to select voices and rhythms from optional
disks.
To load the Voice Disk voices:
NOTE:
The EL-400 can read the data of the EL-500 Voice
Disk.
1
Insert the Voice Disk into the disk slot under the Music Disk
Recorder.
The following message appears.
DATA CONTROL DATA CONTROL
<VOICE DISK>
Select a Group!
2
Press an appropriate voice button.
The following display appears.
NOTE:
Any one of the voice sections can be used here.
Make sure that the volumes of all other voices are
set to off (the minimum value).
3
Select the voice you want to use using the Data Control buttons.
DATA CONTROL DATA CONTROL
<VOICE DISK> [SAVE]
01:YAMAHA CP80
Save
Jumps ahead
10 numbers
Jumps back
10 numbers
Selects
next
number
Selects
previous
number
Selects
next
number
Selects
previous
number
Voice NameVoice Number
NOTE:
Refer to the voice list included in the Voice Disk
for the information on each voice.
4
Play the keyboard to check the sound of the voice.