Filter
Top Products
M7CL Owner’s Manual
Copying, moving, or initializing a channel
134
If desired, you can restore the parameters of a channel to
an initialized state. This operation can be performed on
any channel(s).
1
In the function access area, press the CH
JOB button to access the CH JOB menu.
2
Press the CLEAR button to access the CH
CLEAR MODE popup window.
This popup window lets you initialize parameters.
1 TARGET CHs field
In this field, select the channel(s) that you want to ini-
tialize. You can press this field to cancel the selected
channel.
B CLEAR
Executes the initialization.
3
To select the channel(s) to be initialized,
press the corresponding [SEL] key to make
it light (multiple selections are allowed).
The corresponding channel(s) is/are highlighted in the
TARGET CHs field of the window.
If you want to de-select all of the selected channels,
press the TARGET CHs field.
4
To execute the initialization, press the
CLEAR button.
The parameters of the selected channel(s) will be ini-
tialized.
After initialization, the TARGET CHs field will return
to a state in which nothing is selected.
5
To close the CH CLEAR MODE popup win-
dow, press the CLOSE button.
Initializing the parameters of a
channel
CLEAR button
1
2