Filter
Top Products
Using the graphic EQ and effect libraries
M7CL Owner’s Manual
Graphic EQ and effects
16
189
You can use dedicated libraries to store and recall graphic EQ and effect settings.
● GEQ library
Use the “GEQ library” to store and recall GEQ settings.
All GEQ units used in the M7CL can reference this GEQ
library. (However, the 31BandGEQ and Flex15GEQ are
different types. You cannot recall a GEQ library item of a
different type.)
200 items can be recalled from the library. Number 000 is
read-only data for initialization, and the remaining library
numbers can be freely read or written.
To recall an item from the GEQ library, press the
LIBRARY button located in the upper part of the window
when the GEQ popup window is shown.
For details on using the library, refer to “Using libraries”
(→ p. 35).
● Effect library
Use the “Effect library” to store and recall effect settings.
199 items can be recalled from the effect library. Library
items 1–54 are read-only presets, and correspond to effect
types 1–54 respectively. Library items 55–57 are reserved
for use by the system. Other library item numbers can be
freely read and written.
To recall an item from the effect library, press the
LIBRARY button located in the upper part of the window
when the EFFECT popup window is shown.
For details on using the library, refer to “Using libraries”
(→ p. 35).
Using the graphic EQ and effect libraries
LIBRARY button
• Store/recall operations are performed on individual racks. It is
not possible to store or recall the two Flex15GEQ units indi-
vidually.
NOTE
•To access the GEQ/EFFECT popup window, press the rack in
the GEQ/EFFECT field.
HINT
LIBRARY button
• Library items using the “HQ.PITCH” or “FREEZE” effect types
can be recalled only into rack 5 or 7. They cannot be recalled
into rack 6 or 8.
NOTE
•You can also use MIDI messages (program changes) to recall
effect settings from the library (
→
p. 200).
HINT