Filter
Top Products
Selecting & Playing Voices
P-140 Owner’s Manual
ENGLISH
22
3. Select a voice for the right hand.
A voice for the right hand can be selected from the following 13 voices in the
FUNCTION display. For details, refer to pages 37, 42.
4. Select a voice for the left hand.
A voice for the left hand can be selected from the following four voices in the
FUNCTION display. For details, refer to pages 37, 42.
5. Press any single voice button to exit Split and return
to normal play.
[REVERB] in Split
The reverb type assigned to the
right voice will take priority over
the other. (If the reverb is set to
OFF, the left voice’s reverb type
will be in effect.) Reverb depth
settings made via the panel con-
trols (i.e., pressing the [–/NO] or
[+/YES] buttons while holding the
[REVERB] button; see page 24)
will be applied to the right voice
only.
[EFFECT] in Split
Depending on the conditions, one
effect type will take priority over
the other. The depth will be
decided according to the default
depth value of the voice combina-
tion. However, using Function F4
(pages 37, 42) you can change
the depth value for each voice as
you like. Effect depth settings
made via the panel controls (i.e.,
pressing the [–/NO] or [+/YES]
buttons while holding the
[EFFECT] button; see page 24)
will be applied to the right voice
only.
NOTE
NOTE
1 GRAND PIANO 1
2 GRAND PIANO 2
3 GRAND PIANO 3
4 PIANO & STRINGS
5 ELECTRIC PIANO 1
6 ELECTRIC PIANO 2
7 ELECTRIC PIANO 3
8 CHURCH ORGAN
9JAZZ ORGAN
10 STRINGS
11 HARPSICHORD
12 E.CLAVICHORD
13 VIBRAPHONE
1WOOD BASS
2 BASS & CYMBAL
3 E.BASS 1
4 E.BASS 2