Filter
Top Products
Connections
P-140 Owner’s Manual
ENGLISH
47
Connections
Connectors
CAUTION
Before connecting the P-140 to other electronic components, turn off the power to all the components. Before turning
the power on or off to all components, set all volume levels to minimum (0). Otherwise, electrical shock or damage to the
components may result.
1 MIDI [IN] [OUT] terminals
Use MIDI cables to connect external MIDI devices to these connectors.
MIDI [IN]: Receives MIDI data.
MIDI [OUT]: Transmits MIDI data.
Refer to the “Connecting a Personal Computer” on page 49.
2 SUSTAIN PEDAL Jack
This jack is for connecting an included foot pedal FC3 here.
CAUTION
Make sure that power is OFF when connecting or disconnecting the pedal.
Do not turn on the power to the unit while pressing the foot switch or foot pedal. Otherwise, the
switch or pedal type (on/off) will be reversed.
1 2 3 4
Since MIDI data that can be
transmitted or received varies
depending on the type of MIDI
device, check the “MIDI Imple-
mentation Chart” to find out what
MIDI data and commands your
devices can transmit or receive.
The P-140’s MIDI Implementation
Chart appears on page 64.
NOTE
About MIDI
MIDI (Musical Instrument Digital Interface) is a standard format for data transmission/
reception. It enables the transfer of performance data and commands between MIDI devices
and personal computers. Using MIDI, you can control a connected MIDI device from the P-
140, or control the P-140 from a connected MIDI device or computer.
Depending upon the pedal that is
connected to the SUSTAIN
PEDAL jack, the effect produced
by operating the pedal (ON/OFF,
dynamics, etc.) might be
reversed. If this happens, refer to
the “SUSTAIN PEDAL Type” sec-
tion (page 43).
NOTE
FC3