Filter
Top Products
18
5: More Creative Control (continued)
■ The MELODY, CHORD, and BASS tracks.
To assign a voice to the MELODY,
CHORD 1, CHORD 2, or BASS track,
simply select the required voice number.
DETAIL
Voice number 71 (the rhythm
voice) cannot be assigned to the CHORD
1, CHORD 2, or BASS tracks.
■ The RHYTHM track.
When the RHYTHM track is selected, the
drum and percussion instruments included in
voice number 71 are individually assigned to
each note (C1 through B5). Refer to the
“Rhythm Voice List” on page 47 for the
percussion assignment. You can also assign
voices 69 and 70 (the “sampling voices,”
described below, if they contain data) to
specific notes by first pressing the required
note on the micro-keyboard (use the
[OCTAVE] keys if necessary) and then
selecting the desired voice number by using
the [–1] and [+1] or number keys.
DETAIL
The number shown to the right
of “rY” on the display when a rhythm-
track note is selected is the “MIDI
Note Number” corresponding to that
note. The note number range is from 36
(corresponding to C1) to 95 (B5). This
is a five-octave range, and you’ll
need to use the [OCTAVE] keys to shift
octaves in order to access the full range of notes.
4 Change the Octave As Required
Use the OCTAVE keys to select the required
octaves from the QR10’s five-octave range.
5 Return to the Pattern Play Mode
Return to the pattern play mode either by pressing the [VOICE SELECT] key a second time, or by pressing the [EXIT]
key (this is the same as the [PATTERN/SONG] key).
36 37 38 39 40 41 42 43 44 45 46 47
48 49 50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69 70 71
72 73 74 75 76 77 78 79 80 81 82 83
84 85 86 87 88 89 90 91 92 93 94 95
MIDI Note Number
Voice Number
Octave