Filter
Top Products
36
YPP-100
Connecting to a Personal Computer
By connecting your YPP-100’s MIDI terminals to a personal computer, you can have
access to a wide variety of music software.
When using a MIDI interface device installed in the personal computer, connect the MIDI
terminals of the personal computer and the YPP-100.
Use only special MIDI cables when connecting MIDI devices.
● When using a MIDI interface with a Macintosh series computer, connect the
RS-422 terminal of the computer (modem or printer terminal) to the MIDI
interface, as shown in the diagram below.
MIDI INMIDI OUT
MIDI OUTMIDI IN
YPP-100
● Connect the MIDI terminals of the YPP-100 to the MIDI terminals of the per-
sonal computer.
● When connecting to a computer with a USB interface, use the Yamaha UX16
USB/MIDI Interface. Connect the UX16 and the computer with a standard
USB cable, then make the proper MIDI connections between the YPP-100 and
the UX16.
MIDI IN
RS-422
MIDI OUT
MIDI Interface
YPP-100
YPP-100
IN
OUT
MIDI IN
USB
MIDI OUT
UX16
• When connecting the YPP-100 to a personal computer, first turn the power to both the YPP-100 and
the computer OFF before connecting the cable. After connecting the cable, turn the power to the
computer on first, then turn on the YPP-100.
• When using a Macintosh series computer, set the MIDI interface clock setting in the application
software to match the setting of the MIDI interface you are using. For details, refer to the owner’s
manual for the software you are using.
Computer
(sequencer software)
Computer
(sequencer software)
Computer
(sequencer software)
Using the MIDI Functions