Filter
Top Products
8
YPP-100
The Control Panel
1 [STANDBY/ON] Switch
Press the [STANDBY/ON] switch once to turn
the power ON, a second time to turn the power OFF.
When the power is initially turned ON, a voice
selector LED will light.
2 [MASTER VOLUME] Control
The [MASTER VOLUME] control adjusts the
volume (level) of sound produced by the YPP-100’s
internal stereo sound system. The [MASTER
VOLUME] control also adjusts headphone volume
when a pair of headphones is plugged into the
PHONES jack (page 11).
3 [DEMO] Button
Activates the demo playback mode in which you
can select playback of different demonstration
sequences for each of the YPP-100’s voices. See
page 13 for details.
4 [TRANSPOSE] Button
The [TRANSPOSE] button allows access to the
YPP-100’s TRANSPOSE function (to shift the pitch
of the entire keyboard up or down in semitone
intervals).
5 [FUNCTION] Button
This button accesses a range of utility functions
— including the MIDI functions — that significantly
enhance versatility and playability. See page 26 for
details.
6 METRONOME [START/STOP] Button
Turns the metronome sound on and off. The
[TEMPO/FUNCTION ▼, ▲] buttons are used to
set the tempo of the metronome sound. The [–/NO]
and [+/YES] buttons are used to change the time
signature (beat) of the metronome if used while the
METRONOME [START/STOP] button is held —
page 22.
7 [TEMPO/FUNCTION ▼, ▲] Buttons
These buttons adjust the tempo of the metronome
function as well as the playback tempo of the re-
corder function. The tempo range is from 32 to 280
beats per minute — page 22. These same buttons are
also used to select functions — page 26.
8 [–/NO], [+/YES] Buttons
These buttons select a preset song number for
playback, and are also used to adjust a range of other
parameters.
The PHONES jacks are located on the front panel, below the left end of the keyboard. (see page 11)
B0A0G0F0E0
C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6
D6 E6 F6 G6
8.8.8.
12
3
4
56 7 8 9
!
0