A SERVICE OF

logo

Setting Optimization Metrics
383
Select Port for
Interface Parameter
Setting
Selects the port for which the interface parameters will be set.
Command Actions
Command Result
Example
Enter:
1 1 9 4 4 1 4.2.1
The following message is displayed:
Current port number is 4.2.1
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(1) SPT: Select Port
Enter a parameter at the prompt
Parameter
Format or Range
port number slot.subslot.port
Direct access sequence:
1 1 9 4 4 1
[parameters]
System action taken:
The specified port is set to the active port, ready for
configuration
System message display:
Current port number is
<slot.subslot.port>