Setting Interface Parameters
387
Set RtVBR
Administrative
Weight
Sets the RtVBR Administrative Weight parameter. The RtVBR
administrative weight is the administrative weight of this interface port
for the real-time variable bit rate service category.
Command Actions
Command Result
Example
Enter:
1 1 9 4 4 2 3 10500
The following message is displayed:
Default value is 5040, new value is set to 10500
Press ENTER to continue...
Enter menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch setup
(9) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(2) IPR: Interface Parameters
(3) RVW: RtVBR Admin Weight
Enter a parameter at the prompt
Parameter
Format or Range
RtVBR admin weight 1 - 2147483647
Direct access sequence:
1 1 9 4 4 2 3
[parameters]
System action taken:
The RtVBR admin weight parameter is updated to its
new value.
System message display:
Default value is 5040, new value is set to <n>
