SERVSELECT II™ INSTALLER/USER GUIDE
16
4. Basic Operations
4.1 Controlling Your System at the Analog Ports
The ServSelect II features two analog port sets on the back of the unit that allow you
to connect a monitor and a PS/2 keyboard and mouse for direct analog access. The
appliance uses the OSD, which provides intuitive menus to configure your system
and select computers.
4.2 Viewing and Selecting Ports and Servers
Use the OSD Main dialog box to view, configure and control servers in the
ServSelect II system. View your servers by name, port or by the unique Electronic
ID number (EID) embedded in each SAM. You will see an OSD-generated port list
by default when you first launch the OSD. The Port column indicates the ARI port
to which a server is connected.
To access the Main dialog box:
Press
Print Screen to launch the OSD. The Main dialog box appears.
Figure 4-1. Example of Configured Main Dialog Box
NOTE:
You can also press the Control key twice within one second to launch the SAM. You can use this
key sequence in any place you see Print Screen throughout this installer/user guide.
