1-19
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-4 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in Cisco Unified
CallManager
Task Purpose For More Information
1. Gather the following information
about the phone:
–
Phone Model
–
MAC address
–
Physical location of the phone
–
Name or user ID of phone user
–
Device pool
–
Calling search space and
location information (if used)
–
Number of lines, associated
directory numbers (DNs), and
partitions to assign to the
phone
–
Cisco Unified CallManager
user to associate with the
phone
–
Phone usage information that
affects phone button template,
softkey template, phone
features, IP Phone services, or
phone applications
Provides list of configuration
requirements for setting up
phones.
Identifies preliminary
configuration that you need to
perform before configuring
individual phones, such as phone
button templates or softkey
templates.
Refer to the Cisco Unified
CallManager System
Guide,
Cisco Unified IP Phone
chapter.
See the “Telephony
Features Available for the
Phone” section on
page 5-2.
2. Customize phone button templates
(if required).
Adds Privacy feature to meet
user needs.
Refer to the Cisco Unified
CallManager
Administration Guide,
Phone Button Template
Configuration chapter.
See the “Modifying Phone
Button Templates” section
on page 5-14.
