Chapter 7 Monitoring the CiscoUnified IP Phone Remotely
Network Statistics
7-10
Cisco Unified IP Phone 7940G/7960G Administration Guide for Cisco Unified CallManager 4.2(3)
OL-8555-02
Related Topic
• Configuring Settings on the Cisco Unified IP Phone, page 4-1
• Configuring Features, Templates, Services, and Users, page 5-1
Network Statistics
These Network Statistics areas on a phone’s web page provide information about
network traffic on the phone:
• Ethernet area—Displays information about Ethernet traffic. See the “Ethernet
Statistics” section on page 7-11 for detailed information. Table 7-3 describes
the items in this area.
• Port 1 (Network) area—Displays information about network traffic to and
from the 10/100 SW port on the phone. See the “Port 1 (Network), Port 2
(Access), and Port 3 (Phone) Statistics” section on page 7-12 for detailed
information.
• Port 2 (Access)—Displays information about network traffic to and from the
10/100 PC port on the phone. See the “Port 1 (Network), Port 2 (Access), and
Port 3 (Phone) Statistics” section on page 7-12 for detailed information.
Network Locale
Version
Version of the network locale loaded on the phone.
GARP Enabled Indicates whether the phone learns MAC addresses
from Gratuitous ARP responses.
Voice VLAN Enabled Indicates whether the phone allows a device attached
to the PC port to access the Voice VLAN.
Auto Line Select
Enabled
Indicates whether the phone shifts the call focus to
incoming calls on all lines.
Video Capability
Enabled
Indicates whether the phone can participate in video
calls when connected to an appropriately equipped PC.
Table 7-2 Network Configuration Area Items (continued)
Item Description
