7-3
Cisco Unified IP Phone 7940G/7960G Administration Guide for Cisco Unified CallManager 4.2(3)
OL-8555-02
Chapter 7 Monitoring the Cisco Unified IP Phone Remotely
Disabling Web Page Access
• Network Statistics—Includes the following hyperlinks, which provide
information about network traffic:
–
Ethernet—Displays information about Ethernet traffic. For more
information, see the “Network Statistics” section on page 7-10.
–
Port 1 (Network)—Displays information about network traffic to and
from the 10/100 SW port on the phone. This port connects the phone to
the network. For more information, see the “Network Statistics” section
on page 7-10.
–
Port 2 (Access)—Displays information about network traffic to and from
the 10/100 PC port on the phone. This port connects the phone to a
network device, such as a computer. For more information, see the
“Network Statistics” section on page 7-10.
–
Port 3 (Phone)—Displays information about network traffic to and from
the phone. For more information, see the “Network Statistics” section on
page 7-10.
• Device Logs—Includes the following hyperlinks, which provide information
that you can use for troubleshooting:
–
Debug Display—Provides information that may be useful to the
Cisco TAC if you require assistance with troubleshooting
–
Stack Statistics—Displays information about the phone’s stack tasks. For
more information, see the “Device Logs” section on page 7-16.
–
Status Messages—Displays various system messages. For more
information, see the “Device Logs” section on page 7-16.
• Streaming Statistics—Includes the following hyperlink:
–
Stream 1—Display a variety of streaming statistics. For more
information, see the “Streaming Statistics” section on page 7-18.
Disabling Web Page Access
For security purposes, you may choose to prevent access to the web pages for a
phone. If you do so, you will prevent access to the web pages that are described
in this chapter and to the Cisco Unified CallManager User Options web pages.
