Chapter 7 Monitoring the CiscoUnified IP Phone Remotely
Device Logs
7-16
Cisco Unified IP Phone 7940G/7960G Administration Guide for Cisco Unified CallManager 4.2(3)
OL-8555-02
Related Topic
• Configuring Settings on the Cisco Unified IP Phone, page 4-1
Device Logs
The Device Logs area on a phone’s web page provide information you can use to
help monitor and troubleshoot the phone:
• Debug Display area—Provides information that may be useful to the
Cisco TAC if you require assistance with troubleshooting.
• Stack Statistics area—Displays information about the phone’s stack tasks.
See the “Stack Statistics” section on page 7-16 for detailed information.
• Status Messages area—Displays up to the 10 most recent status messages that
the phone has generated since it was last powered up. See the “Status
Messages” section on page 7-17 for detailed information.
Stack Statistics
The Debug Display area on a phone’s web page displays information about the
phone’s stack tasks. This information may be useful to Cisco Technical
Assistance Center personnel if you require assistance with troubleshooting.
To display the Stack Statistics area, access the web page for the phone as
described in the “Accessing the Web Page for a Phone” section on page 7-2, and
then click the Stack Statistics hyperlink.
Neighbor IP Address IP address of the neighbor device
Note Displays only if the connected device supports
Cisco Discovery Protocol (CDP).
Neighbor Port Neighbor device port to which the phone is connected
Note Displays only if the connected device supports
Cisco Discovery Protocol (CDP).
Table 7-4 Port Statistics Area Items (continued)
Item Description
