24
Reference
Map Page Options
Orientation— North Up— fi xes the top of the map display to a north heading; Track Up— fi xes the
top of the map display to the current track heading; Course Up— fi xes the map so the direction of
navigation is always “up” and turns the navigation leg line vertical on the screen.
AutoZoom— On/Off: when “On” the map will automatically adjust the map scale to a lower scale
as you approach you destination point.
Source Tab
Data— On/Off: turns the loaded map data on or off.
Points Tab— Waypoints, Active Route, Marine Navaids, and Geo Points
Text— None, Small, Medium, and Large: controls the screen size of the name.
Zoom— Auto, Off, 120 ft.-800 mi.: sets the maximum scale at which the feature should appear on
the screen. Some types of data will only show up to certain zoom scales.
Other Tab
Bearing Line— On/Off: draws an extension from the end of the boat icon in the direction of travel.
Accuracy Circle— On/Off: toggles the circle “On” and “Off”. The circle represents the approximate
accuracy of the unit based on EPE and DOP. Your position will be within the circle.
Nav Line— On/Off: toggles the black and white line which points to the current navigation point.
Map Setup Menu Options
From the map setup page, you can access the following menu options:
• Restore Defaults— restores settings back to factory settings for the tab highlighted.
• Restore All Map Defaults— restores settings back to factory settings for all tabs.
To restore defaults for map settings:
1. From the Map tab in the Main Menu, highlight the tab you want to restore settings to and press
MENU.
2. Highlight ‘Restore Defaults’ (highlight ‘Restore All Map Defaults’ if you want all tabs restored) and
press ENTER/MARK.
Other Tab
Map Setup Menu Options
Points Tab
