A SERVICE OF

logo

46 Chapter 1 Troubleshooting control panel messages EN
Table 1-1 4500 Jam locations and associated error messages
1
13.11 Paper in the paper path is
too long. Check the Tray 1 area.
Check the entire paper path.
8
13.3 Jam in duplex reverse unit.
Inspect the rear of the duplex unit
and the duplex tray.
2
13.10 Paper in the paper path is
too short. Check the Tray 1 area.
Check the entire paper path.
9
13.2 Jam in fusing area. Check the
fuser assembly, output assembly,
and duplex unit.
3
13.9 Irregular paper jam in the
paper path. Check the Tray 1 area.
Check the entire paper path.
10
13.1 Jam in fusing area. Check the
fuser assembly, output assembly,
and duplex unit.
4
13.8 Door open jam. Check the
rear door, duplex cover, and rear
output door.
13.7 Jam in paper feed area.
Check the entire paper path.
11
13.1 Paper jam. OPEN MIDDLE
FRONT DRAWER
alternates with
CHECK IN REAR OF DRAWER.
Check the middle front drawer.
Check and pull out the fuser.
5
13.6 Jam in duplex paper feed
area. Inspect the rear of the duplex
unit and the duplex tray.
12
13.1 Paper jam: Check in rear of
drawer. Check the rear of the
middle front drawer. Reseat the
transfer roller.
6
13.5 Jam in duplex paper feed
area. Inspect the rear of the duplex
unit and the duplex tray.
13
13.0 Jam in input feed area. Check
the input trays and duplex unit.
7
13.4 Jam in duplex unit. Inspect
the rear of the duplex unit and the
duplex tray.
14
13.12 Paper did not clear the input
sensor in time.
www.GovTechMedia.com