EN Service mode 57
2
Setting registration numbers
On each of the color bars in the process section are bolded numbers
that indicate the current number set on the control panel. These bolded
numbers will always be in the middle of the bars. To set the correct
value for each of the colors, look at the lines within the bar and find the
grouping that has the color line directly on top of the black line (it will
have more white space). Print at least five registration pages to see if
the new settings are correct.
Note
Using a magnifying glass to look at the lines will help in selecting the
best number.
Setting the registration number:
1 Use the I
TEM key to select the appropriate color (cyan, magenta, or
yellow) to view or change its registration number.
2 Press the + V
ALUE - key to change the registration number to the
one identified.
3 Press the S
ELECT key to enter the value.
Setting margin numbers
The top margin number is not tray dependent like the left side margin.
You can print the registration page from whichever tray has paper.
Using a ruler, measure from the top edge of the paper to the series of
lines. Find the line that is 13 mm (0.5 in) away from the edge of the
paper.
Setting the top margin registration value:
1 Press the I
TEM key to scroll through the Service menu until top
margin is displayed.
2 Press the + M
ENU - key until the number to be entered is displayed.
3 Press the SELECT key to enter the number.
Print another registration page and the number just entered will align
with the arrow and be bolded.
www.GovTechMedia.com
