Service Calibrations
5-30
HP DesignJet 5000 and 5500 Series Printers Service Manual
Calibration Error: 1005 (User)
Problem
Description:
Paper Axis Error.
Corrective Action: Try the following:
Perform Printhead Recovery (Page 6-15).
Reseat ALL the Printheads and repeat the Printhead Alignment
(See the User’s Guide).
Replace the Carriage Assembly Page 8-46.
Calibration Error: 1040 (User)
Problem
Description:
Scan-Axis Alignment Error in "slow" speed section in Black and
Magenta Pattern.
Corrective Action: Try the following:
Perform Printhead Recovery (Page 6-15).
Perform the Service Scan-Axis Calibration Page 5-7.
Replace the Black and Magenta Printheads and repeat Printhead
Alignment (See the User’s Guide).
If the media used is a color media try the Printhead Alignment
with white media and if the error persists replace the Lens Cover
Page 9-5.
Replace the Carriage Assembly Page 8-46.
Calibration Error: 1041 (User)
Problem
Description:
Scan-Axis Alignment Error in "slow" speed section in Cyan and
Yellow Pattern.
Corrective Action: Try the following:
Perform Printhead Recovery (Page 6-15).
Perform the Service Scan-Axis Calibration Page 5-7.
Replace the Cyan and Yellow Printheads and repeat the Printhead
Alignment (See the User’s Guide).
If the media used is a color media try the calibration with white
media and if the error persists replace the Lens Cover
Page
9-5
.
Replace the Carriage Assembly (Page 8-46).
