A SERVICE OF

logo

Removal and replacement procedures 45
3. Connect the Mini-SAS cable, LED cable and two USB cables to connectors on system board.
4. Connect the power cable and fan cable to connectors on system board.
5. Completely push the system tray into the server.
6. Place the power cable under the tray handle in the server. Put the power cable and fan cable
together inside the left cable clamp of the chassis.
7. Lock the cable clamp to secure the power cable and fan cable.
8. Place the LED cable and two USB cables in the server.
9. Secure the cables using the cable clamp on the right side of the chassis.
10. Tighten the two thumbscrews on both sides of the system tray.