Diagnostic tools 78
Security menu
Admin Password Current admin password status (Clear or Enabled)
Change Admin Password Select the field, and then press Enter to set, change, or remove a admin
password.
Admin password
The Security menu allows users to set an admin password. When entered, this password will allow
the user to access and change all settings in the Setup Utility.
To set an admin password:
1. In the Security menu screen, select the Admin Password field then press Enter.
2. Type a new password in the password box.
The password may consist of up to eight alphanumeric characters (A-Z, a-z, 0-9).
3. Retype the password to verify the first entry, and then press Enter.
4. Press F10 to save the password and close the Setup Utility.
After setting the password, the Admin Password field value is set to Enabled.
To change the admin password:
1. In the Security menu screen, select the Admin Password field, and then press Enter.
2. Type the original password in the password box.
3. Type a new password, and then press Enter.
4. Retype the new password to verify the first entry, and then press Enter again.
5. Press F10 to save the password and close the Setup Utility.
To remove the admin password:
1. In the Security menu screen, select the Admin Password Is field, and then press Enter.
2. Type the original password then press Enter.
