A SERVICE OF

logo

Removal and replacement procedures 57
Installing the power supply unit
The system supports Server Standard & Compliant supplies, along with any other compatible supplies
that may be developed.
Power supply unit installation guidelines
Installation instructions for the MicroServer standard multi-outputs power supply. To simplify the
standard power supply unit installation, the user must remove and re-install the ODD.
1. Use the HP ProLiant MicroServer key to unlock the panel door.
2. Open the panel door of the server and remove any components or cables that prevent access to
the slot.
3. Loosen the rear thumbscrew which locks the top panel on the chassis.
4. Slide the top panel forward and then lift to remove it from the chassis.