TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
2-6
2.3 Checking where to Install
the Printer
Before installing the printer, check the environment and space for the
installation.
2.3.1 Installation Environment
Install the printer on a stand or desk in a suitable environment as shown below.
The following gives the ranges of temperature and humidity acceptable for
printer operation.
z Acceptable environment
– Temperature: 10°C to 32.5°C
– Humidity: 20% to 80%
z Recommended environment
– Temperature: 17.5°C to 27°C
– Humidity: 50% to 70%
Do not install the printer in the following places:
z In a location subject to direct sunlight.
z Near an air conditioner, or where it is subject to direct cool or warm drafts,
or radiated heat.
z Where it is subject to exhaust discharged directly from a PC or printer.
z Where the temperature or humidity changes significantly. (Take care so that
the printer is not subject to condensation.)
z Where it is subject to excessive dust or corrosive gases.
z In a location such as a laboratory where chemical reactions occur.
z Where an ultrasonic humidifier is being used.
z In a poorly ventilated location.
z Near equipment which generates electrical noise and strong magnetic fields.
z Where it is subject to vibration or shocks.
z Anywhere that cannot withstand the weight of the printer (about 29 kg/
63.9 lb for the printer with consumables, and about 42 kg/92.6 for the max-
imum printer configuration including the options).
z In an uneven place or mounting location that is not level.
z Where it may slide or where it is sloped.
z On more than one stand.
