A SERVICE OF

logo

Weekly Cleaning
Maintenance 5-3
Maintenance
Precharger Area
The precharger is a wire located inside the drum. The drum contains a built-in cleaning rod to
remove toner that might build up on the precharger wire.
To clean the precharger, follow these steps:
1. Pull out the precharger cleaner handle (Figure 5-2), then push it back into its original
location. Repeat this "out-in" process 4 or 5 times.
Figure 5-2 Cleaning the Precharger
2. Push the precharger cleaner in completely.
Precharger cleaner