Using the Operator Panel
2-70 ADVANCED OPERATION GUIDE
Creating Custom Paper Type
The following describes the procedure used to set a user-defined paper
type for the printer. Eight custom user settings may be registered. After
having been set, any of these may be called up when setting the paper
type for a paper source.
The paper weight and duplex path can be set (see Setting the Paper
Weight on page 2-71, and Setting the Duplex Path on page 2-71) after
selecting the paper type to be customized as follows. For how to reset the
customized settings, see Resetting the Custom Paper Type on page 2-72.
1
Press [MENU].
2
Press U or V repeatedly until Paper
Handling > appears.
3
Press Z.
4
Press U or V repeatedly until >Type
Adjust > appears.
5
Press [OK] ([ENTER]). A blinking question
mark (?) appears.
6
Press U or V to display the desired paper type. The display changes as
shown below.
Custom 1 (to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
High quality
7
When the paper type to be customized is displayed, press [OK]
([ENTER]).
Paper Handling >
>Type Adjust >
Custom 1
>Type Adjust
? Custom 1
