-102
Setting the Anti-Theft
Setting the anti-theft function will disable any projection of images even if signals are sent to
the projector. A keycode is necessary to release the system lock. Make sure to remember the
key code you set.
Info
If the keycode is not correctly entered in the key code field, only the key code screen will
be displayed and no other operations will be possible. Repairing the system lock even
within the period of guarantee will incur reparation costs. For details, refer to your nearest
Sharp Representative. See page 118.
-102
Entering the Keycode
• “Anti-Theft” cannot be selected unless
“Password” is set. (See page 100.)
• When “Anti-Theft” is selected, the password
input box will appear. Enter the keycode af-
ter the right password is entered.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 Press any button on the remote
control or on the GyroRemote,
to enter the keycode.
Note
•The following buttons cannot be set
as key codes. (both on the projector
and GyroRemote)
• POWER button
• ENTER button
• UNDO button
• MENU button
(GyroRemote)
• GYRO ACTIVE button
• POINTER button
• L-CLICK/ENTER button
• R-CLICK/UNDO button
• POWER button
• MENU button
• TEACH button
• RF CH+ button
PG-M25X#E#p97_106.p65 02.4.29, 3:24 PM102
