72
Network Settings (cont.)
-72
Setting the SSID
Set the projector’s SSID.
The default setting is “SHARP_PRJ”.
Select “Wireless LAN” in the network
menu
on the menu screen
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1
Press
or
to select
“Wireless LAN” and then press
.
2 Press or to select
“SS ID” and then press .
3 Press or to select
the characters you want to set.
Note
•The characters can be entered fllowing:
Letters (A to Z), numerical (0 to 9),
symbols (–, _, ( ))
•If you want to delete one character to the
left, select “BS” and press
.
4 Press .
•You can also move the cursor using
on the GyroRemote.
Note
•If you want to correct a letter or symbol,
press or to move the cursor to the
character you want to correct, and then use
or to correct the character.
•
If you want to cancel the settings, press .
5 Repeat steps 2 and 3 to set all
the characters.
Note
•A maximum of 16 characters can be set.
6 Press .
•The settings are enabled.
PG-M25X#E#p65_77.p65 02.4.29, 3:19 PM72
