Easy to Use Functions
-69
Network Settings
Note
•This section explains items that can be set in a network. A wireless connection will not be possible if these
items are not set correctly.
•Also, as there are values that must be entered in a pre-configured network, make sure to consult with your
network administrator.
Setting Up a Projector Name
This Network setting assigns a name to the pro-
jector. The default setting is “MY PROJECTOR”.
When selecting “Projector” in the net-
work menu on the menu screen
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1
Press or to select
“Projector” and then press
.
2 Press in “Name”.
3 Press or to select
the characters you want to set.
Note
•The following characters can be entered:
Letters (A-Z), numbers (0 – 9) or symbols
(–, _, ( )).
•Pressing
or switches
between procedures as shown below.
•If you want to delete one charactor to the
left, select “BS” by pressing or
and press .
•The projector name is displayed when the
projector has been found via the computer.
4 Press .
Note
•If you want to correct a letter or symbol,
press or to move the cursor to the
character you want to correct, and then use
or to correct the character.
•Characters can also be selected using
on the GyroRemote.
•
If you want to cancel the settings, press .
PG-M25X#E#p65_77.p65 02.4.29, 3:18 PM69
