A SERVICE OF

logo

21
Figure 5a
C - Utilising 1 of 2 available pump case tappings to use a lifting eye bolt
D - Casing assembly being lifted to the vertical position with the eyebolts at the top end to
assist front cover removal and prevent damage to the studs
Lift off front cover by utilizing case lifting eye and placing in threaded lifting hole (Fig.5).
Remove the drive flange gasket
Remove the rotor from the housing with the use of suitable lifting equipment
Remove any remaining spares from the housing
Using the lifting eye and suitable lifting equipment position the housing onto the edge of the
pallet, with the front facing down, as shown in Figure 6