63
5.2 Extinguishing Media To Avoid
• Do not use water jets
5.3 Unusual Fire and Explosion Hazards
• Avoid spraying directly into storage containers because of danger of boil over
5.4 Special Protective Equipment for Fire fighters
• Protective clothing and approved breathing apparatus when in close proximity of fire
•
During burning, poisonous acrolein may be found
6 Accidental Release Measures
Used lubricant may become contaminated with pumped product, also verify precautions and
advice against relevant appropriate product information
6.1 Personal Protection
• Wear goggles and gloves. If spillage has occurred in a confined space, ensure sufficient
ventilation and check that a safe, breathable atmosphere is present before entry.
6.2 Environmental Precautions
• Protect drains from spills and prevent entry of product. Treated effluent may be biodegradable.
Recover cleaning water for later treatment.
6.3 Methods for Cleaning Up
• Contain and recover liquid, soak up with absorbent material (sand, peat, etc.) or contain and
shovel into drums or containers. Remove residue by spraying with water
7 Handling and Storage
Used lubricant may become contaminated with pumped product, also verify precautions and
advice against relevant product information
7.1 Handling
• Contact with hot product causes burns.
•
Avoid contact with eyes. If splashing is likely to occur wear a full visor or chemical goggles to
appropriate local national standards.
• Avoid frequent or prolonged skin contact with fresh or used product.
• Wash hands thoroughly after use.
