A SERVICE OF

logo

7 - 22
CHAS
STEERING SYSTEM
Steering shaft
1.Straighten:
Lock washer tabs 1
2.Remove:
Bolts 2
Lock washer 3
Cable guide 4
3.Remove:
Clip (steering shaft)
Nut
Washer
4.Remove:
Cotter pins
Nuts
Tie-rods 1
NOTE:
When removing the rod ends from the
steering shaft and knuckle arm, use a Gen-
eral Bearing Puller.
5.Remove:
Steering shaft 1 (with steering bearings)
(from upside)
6.Remove:
Steering bearings 1
Collars 2
Oil seals 3
7