3 - 21
INSP
ADJ
ENGINE OIL REPLACEMENT
6.Inspect:
● O-rings 1
● Compression spring 2
● Oil strainer 3
● Oil filter 4
Damage → Replace.
7.Clean:
● Compression spring 2
● Oil strainer 3
● Oil filter 4
● Drain plug 5 (crankcase)
● Oil filter cover 6
Wash them with a cleaning solvent.
8.Apply:
● Engine oil (light coating)
(to the O-rings)
9.Install:
● Oil filter 1
● Oil filter cover 2 (with O-ring)
● Oil strainer 3
● Drain plug 4 (crankcase)
CAUTION:
Before reinstalling the drain plug (crank-
case), do not forget to fit the O-ring 5,
compression spring 6 and oil strainer. Be
sure you fit each item in the correct posi-
tion and order.
10.Fill:
● Crankcase
Refer to “ENGINE OIL LEVEL INSPEC-
TION” section.
T
R
.
.
Oil filter cover:
10 Nm (1.0 m • kg, 7.2 ft • lb)
Drain plug (crankcase):
43 Nm (4.3 m • kg, 31 ft • lb)
Total amount:
1.8 L (1.6 Imp qt, 1.9 US qt)
Periodic oil change:
1.5 L (1.3 Imp qt, 1.6 US qt)
With oil filter cleaning/replace-
ment:
1.6 L (1.4 Imp qt, 1.7 US qt)
3
