A SERVICE OF

logo

– 21 –
CHAS
REMOVAL
1.Place the machine on a level surface.
2.Loosen:
Nuts (front wheel)
Apply the front brake.
3.Block the rear wheels, and elevate the front
wheels by placing the suitable stand under
the frame.
4.Remove:
Nuts
1
(front wheel)
Front wheel
2
5.Remove:
Wheel cap
Cotter pin
1
Axle nut
2
Plain washer
3
1
3
2
6.Remove:
Front brake caliper
1
N
OTE:
Do not depress the brake lever when the
wheel is off the machine otherwise the brake
pads will be forced shut.
1
7.Remove:
Front wheel hub
1
(with brake disc)
1
FRONT WHEEL