Parameter Settings
TENORI-ON Manual 108
Setting Parameters with the Jog Dial ■ System Menu
The name entry procedure is described in the Rename Song section on Page 65.
● Owner names can be up to 16 characters in length.
2 When the owner name has been entered as required use the jog dial to highlight the "
§
"
symbol in the lower right corner of the display and press the [OK] button.
3 The submenu display will reappear when the name has been entered.
4. Version Check
Displays the version number of the TENORI-ON system ROM.
5. Factory Reset
Resets all TENORI-ON parameters to the original factory settings. All blocks and all layers
are restored to the factory default settings, and all active notes are cleared. All registered
data – alarm, time signal, owner name, etc. – will also be cleared, as will the Save As Default
(➝ Page 106) settings. Loaded sampling files will not be initialized.
Press the [OK] button while this display is showing to restore the factory defaults.
● Press the [CANCEL] button (or use the jog dial to select "CANCEL" on the LCD and then press the [OK]
button) if you want to cancel the operation.
■ Range . . . . . . . . . . . .OK, CANCEL
■ Default . . . . . . . . . . . OK
■ LED Buttons . . . . . . . No display
Input File Name ∞
[NO NAME ]
ABCDEFGHIJKLMNOPQRST
UVWXYZ-0123456789 ª§
Owner Name Input Field
Available Characters
Input Cursor
Set Name
Backspace & Delete 1 Character
