The TENORI-ON Is …
TENORI-ON Manual 7
Connecting to Second TENORI-ON or Computer
❊ Panning (Stereo Positioning) . . . . . . . . . . . . . . . . Panpot ➝ Page 53
❊ Effects (Reverb and Chorus) . . . . . . . . . . . . . . . . Effect Menu ➝ Page 99
❊ Loading Samples. . . . . . . . . . . . . . . . . . . . . . . . . Samplings ➝ Page 88
The supplied "TENORI-ON User Voice manager" software
installation guide.
The TENORI-ON has a mini-DIN type MIDI connector that, via the supplied MIDI cable
adaptor, can be connected to a second TENORI-ON to allow synchronized performance, or
to a computer to allow recording of the instrument’s MIDI output.
[Reference]
❊
MIDI Specifications . . . . . . . . . . . . . . . . . . . . . . . MIDI Data Format ➝ Page 115
MIDI Implementation Chart ➝ Page 118
Transmitting the TENORI-ON MIDI Output to a Computer
TENORI-ON performance data (MIDI data) can be transmitted to a computer where it can be
recorded and processed.
● Connecting to a Computer
● Synchronized Performance with Other TENORI-ON Instruments
Two TENORI-ON instruments can be connected via MIDI so that when playback is started or
paused on the "Master" TENORI-ON, the "Slave" TENORI-ON follows. To use this capability
one of the connected TENORI-ON instruments must be set to Master status and the other
must be set to Slave. It is also possible to synchronize more than two TENORI-ON
instruments in this way. In such cases only one TENORI-ON can function as the Master while
all others are Slaves.
[Reference]
❊
Master/Slave Settings for Synchronized PerformanceSynchronize ➝ Page 61
Connecting to Second TENORI-ON or Computer
MIDI
TENORI-ON
MIDI OUT
USB, etc.
MIDI IN
MIDI IN
MIDI OUT
MIDI
Interface
Computer
Supplied MIDI Cable
Adaptor
