Parameter Settings
TENORI-ON Manual 70
Setting Parameters with the Jog Dial ■ File Menu
● If a file with the same name exists on the SD Memory Card an overwrite confirmation display like the
one shown below will appear.
● Press the [OK] button if it’s OK to overwrite the file. Press the [CANCEL] button (or use the jog dial to
select "CANCEL" on the LCD and then press the [OK] button) to cancel the operation and leave the
original file unaltered.
5 The display shown in step 3, above, will reappear when the operation has finished.
● Rename All Blocks
Allows a new name to be entered for an All Blocks file on an SD Memory Card.
1 Insert the SD Memory Card containing the file you want to rename into the TENORI-ON
card slot.
2 Use the jog dial and [OK] button to navigate to the All Blocks function menu as follows:
"Main menu" ➝ "File menu" ➝ "All Blocks"
3 Use the jog dial to highlight the "Rename" function, then press the [OK] button.
4 All Blocks files on the card will appear as a list on the LCD display (with no file
extension). Use the jog dial to select the file you want to rename.
● Only files that are in All Blocks format will be displayed.
Blocks: ∞
"1-BLOCKS1020-01 "
Already Exists!
Overwrite? OK
All Blocks ∞
Operation: Load
All Blocks ∞
Operation: Rename
Blocks: Rename ∞
0302E-BLOCKS-01
0302E-BLOCKS-01
0302G-BLOCKS-01
